TENS Units:
Arista SD Plus TENS Unit

Arista SD Plus TENS Unit

The Arista Strength Duration unit reduces pain by controlling each channel independently. This is a TENS unit that operates with Burst, Normal or Modulation modes. This is a dual channel unit, which allows you to use up to four electrodes at a time (two electrodes per channel). It comes with an AC/DC adaptor that plugs into the wall or it can work with a 9 volt battery.

All TENS units sold by Medword ship complete with:

• Instruction Manual
• Pad Placement Chart
• Lead wires
• One pack of 4 Electrodes
• 9-volt AC Adaptor
• Battery
• Carrying Case
  
  

Specifications

Mode Selections

The SD TENS unit offers six settings on the mode switch:

1. Burst Mode: This mode provides a series of seven pulses at a fixed rate of 80Hz.  Bursts occur two times per second. 
    
2. Normal Mode: This mode provides standard stimulation for TENS.  
   
   
3. Modulation Modes: The four modulation modes are designed for the patient to obtain maximum comfort from TENS.  Individual preferences can be met with these additional modes, improving patient compliance.  Modulation of the TENS output parameters:  width, rate and amplitude may prevent the nervous system from accommodating to the continuous mode of TENS, thus improving duration of pain relief.
   

1. A. Strength-Duration Modulation (SD):  Strength-Duration Modulation consists of alternating modulated amplitude and width so that one parameter is always decreasing while the other is increasing and vice versa.  The amplitude decreases 60% from the amplitude control setting and returns to that setting.  The width decreases 50% from the width control setting and returns to that setting.  Total cycle time is six seconds.
   
   
2. B. Modulated Width (MW):  Pulse width decreases 48% (pulse width= 250 u sec.), 33% (pulse width= 180 u sec.) from the selected value, and then returns to the selected value.  Total cycle time is six seconds.

1. C. Modulated Rate (MR):  Pulse rate decreases 63% (pulse rate= 150 Hz), 56% (pulse rate= 100 Hz) from the selected value, and then returns to the selected value.  Total time is six seconds.
   
   
2. D. Combination Modulation (CM):  Combination modulation consists of alternating modulated width and modulated rate so that one parameter is always decreasing while the other is increasing and vice versa.

All values have 10% +/- tolerance

To Order Extra Electrode Packs For TENS Unit and Electronic Muscle Stimulator (EMS) Units, Please Go Here

Guarantee: 100% Satisfaction & Competitor Prices Matched
Medword Medical Transcription, through our supplier, guarantees 100% customer satisfaction. Medword's supplier is the low-price leader and promises to match all competitors prices.

• If you are not 100% satisfied with the results you are receiving from your TENS or EMS (Electronic Muscle Stimulators), as long as it is returned in good condition within 45 days, you will be issued a FULL REFUND.


• The TENS units and EMS (Electronic Muscle Stimulators) come with a 5 Year Warranty. If you are having any problems with your Electronic Muscle Stimulator or TENS unit, send it back to our supplier and a new replacement unit will be shipped out to you immediately.

There is a 5 Year Warranty on this unit.
You will receive delivery within five business days of placing the order (usually before) if you are located in the U.S.A. If you need the package next day or 2nd day, please select either of those shipping methods at time of purchase and the delivery will be guaranteed. International shipping is available. However, rates and time of arrival will vary with destination. Complete your purchase by adding this item to your shopping cart, select shipping method as "International" and you will be contacted to discuss shipping details before final credit card authorization.